Filter
Top Products
BIOS Setup Utility
SY-KT880 DRAGON 2
65
APM Configuration
Setting Description Note
Enabled Default
Power
Management/
APM
Disabled
Use this item to enable or
disable a power management
scheme. If you enable power
management, you can use the
items below to set the power
management operation.
On/Off Default
Power Button
Mode
Standby
Suspend
Setting power button mode.
Power Off The system will remain off
when power comes back after a
power failure.
Default
Power On The system will switch on when
power comes back after a power
failure.
Restore on
AC/Power
Loss
Last State The system will return to the
state it was in before the power
failure when power returns. (i.e:
If the system was on, it will
switch on again, if it was off, it
will remain off)
Disabled Default
Standby Time
Out
1 Min, 2 Min,
4 Min, 8 Min,
10 Min, 20 Min
30 Min, 40 Min
50 Min, 60 Min
Lets you define the standby
time out times.
Disabled Default
Suspend Time
Out
1 Min, 2 Min,
4 Min, 8 Min,
10 Min, 20 Min
30 Min, 40 Min
50 Min, 60 Min
Lets you define the suspend
time out times.