Hardware Installation SY-7VCA
35
5. Universal Serial Bus USB1 (2 Ports)/USB2 (2 Ports)
This Motherboard provides four USB ports for your additional devices.
Plug the USB device jack into the available USB connector USB1 or
USB2.
- Standard device drivers come with the Win98 for commonly used
USB devices.
- With Win95, use the flow UHCI specifications. To use USB devices
under Win95, usually you have to install the device that driver comes
with the USB device you have purchased.
USB2 is available. To make use of these USB ports, purchase a USB cable
from your dealer. The lay-out of USB2 is as follows:
6. Onboard Joystick port/audio
This Motherboard provides Joystick port and audio.
- Attach the joystick cable to the 15-pin JOYSTICK port at the rear
panel of you motherboard.
- This Motherboard features three built-in audio-stereo ports (labeled
line-in, line-out, and mic jack) convenient to directly plug-in all your
external audio devices.
1
1
5
5
2
2
3
3
4
4
GND
GND
(+)Data
(-)Data
Power
GND
GND
(+)Data
(-)Data
Power
USB2
USB2