Filter
Top Products
SY-7VCM Quick Start Guide
8
Hardware
Installation
Step 2. Connections to the Motherboard
This section tells how to connect internal peripherals and the power supply to the Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis
Fan, Front Panel Devices (Internal Speaker, Reset Button and IDE LED Switch.), Wake-On-
LAN card, VGA card, Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new SY-7VCM
Motherboard, please refer to SY-7VCM Motherboard User's Guide and Technical Reference
online manual on the CD-ROM.
Connectors and Plug-ins
Wake-On-LAN Header: JP10 Standard IrDA (Infrared Device Header): SIRCON
Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 Pin4 Pin5
5VSB GND MP-Wakeup VCC None IRRX GND IRTX
CPU Cooling Fan: CPUFAN Chassis Fan: CHAFAN
Pin1 Pin2 Pin3 Pin1 Pin2 Pin3
GND 12V SENSOR GND 12V SENSOR
USB3 USB4
Pin1 Pin2 Pin3 Pin4 Pin1 Pin2 Pin3
Pin4 Pin5
Power Data(-) Data(+) GND Power Data(-) Data(+) GND GND
Pin1 Pin2 Pin3 Pin4
CD -IN: CDIN1
Connect to your CD-ROM audio output.
L G G R
Pin1 Pin2 Pin3 Pin4
AUX-IN: AUXIN
For Auxiliary Audio devices (1.0Vrms typ.)
L G G R
Pin1
Pin2
Pin3 Pin4
PHON IN:
PHON
Connect to phone connector
IN G G Mono
Power LED
Pin1 Pin2 Pin3
5V NC GND
Speaker
Pin1 Pin2 Pin3 Pin4
5V NC NC Speaker out
HDD LED PWRBT RESET
Pin1 Pin2 Pin1 Pin2 Pin1 Pin2
LED Anode LED Cathode Power On/Off GND Power Good GND
ATX Power On/Off: PWRBT
Connect your power switch to this header (momentary switch type).
To turn off the system, press this switch and hold down for longer than 4 seconds.
Power LED
Speaker
Reset
PWRBT
HDD LED
++
+
_
_
_
1 1