Filter
Top Products
BIOS Setup Utility SY-K7ADA
63
The following tables describe each field in the INTEGRATED
PERIPHERALS Menu and provide instructions on how to configure the
IDE controls, FDC controls, and the onboard serial and parallel ports.
3-4.1 IDE Device Controls
IDE Controls Setting Description Note
Disabled Turn off the on-board IDE
On-Chip PCI IDE
Ø Primary
Ø Secondary
Enabled Use the on-board IDE Default
mode 0-4 0 is the slowest speed
4 is the fastest speed
IDE
Ø Primary Master PIO
Ø Primary Slave PIO
Ø Secondary Master PIO
Ø Secondary Slave PIO
Auto For better performance and
stability, we suggest you use
the Auto setting to set the
HDD control timing.
Default
Disabled
IDE
Ø Primary Master UDMA
Ø Primary Slave UDMA
Ø Secondary Master UDMA
Ø Secondary Slave UDMA
Auto Select Auto to enable Ultra
DMA Mode support.
Default
Enabled Default
On-Chip USB
Controller
Disabled
This should be enabled if
your system has a USB
installed on the system board
and you want to use it. Even
when so equipped, if you
add a higher performance
controller, you will need to
disable this feature.
Disabled Default
USB Keyboard
Support
Enabled Select Enabled if your
system contains a Universal
Serial Bus (USB) controller
and you have a USB
keyboard.