Filter
Top Products
SY-K7VLM-B
Quick Start Guide
9
Hardware
Installation
Speaker
_
+
_
+
_
+
Reset
PWRBT
Power LED
HDD LED
Step 2. Connections to the Motherboard
This section tells how to connect internal peripherals and the power supply to the Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis
Fan, Front Panel Devices (Internal Speaker, Reset Button and IDE LED Switch.), Wake-On-
LAN card, VGA card, Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new SY-K7VLM-B
Motherboard, please refer to SY-K7VLM-B Motherboard User's Guide and Technical
Reference online manual on the CD-ROM.
Connectors and Plug-ins
Standard IrDA (Infrared Device Header):
SIRCON
Wake-On-LAN Header: JP10
Pin1 Pin2 Pin3 Pin4 Pin5 Pin1 Pin2 Pin3
VCC NC IRRX GND IRTX
5VSB GND MP-Wakeup
USB3_4: USB3 USB3_4: USB4
Pin1 Pin2 Pin3 Pin4 Pin6 Pin7 Pin8 Pin9 Pin10
Power Data(-) Data(+) GND Power Data(-) Data(+) GND GND
CPU Cooling Fan:
CPUFAN
CPU Cooling Fan:
CPUFAN2
Chassis Fan: CHAFAN1
Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 Pin1 Pin2 Pin3
GND 12V SENSOR GND 12V NC GND 12V SENSOR
CD Line-in: CDIN1
Pin 1 Pin 2 Pin 3 Pin 4
Connect the CD Line-in cord from the CD-ROM device to
the matching header CDIN1
L G G R
Power LED
Pin1 Pin2 Pin3
5V NC GND
Speaker
Pin1 Pin2 Pin3 Pin4
5V NC NC Speaker out
HDD LED PWRBT RESET
Pin1 Pin2 Pin1 Pin2 Pin1 Pin2
LED Anode LED Cathode Power On/Off GND Power Good GND
ATX POWER On/Off : PWRBT
Connect your power switch to this header (momentary switch type).
To turn off the system, please press this switch and hold down for longer than 4
seconds.