Filter
Top Products
122
I’m using a 133MHz FSB CPU, I cannot find the DDR 100MHz option
in the BIOS, why?
The DDR memory clock speed should not be lower than the CPU FSB
speed.
VGA Issue
I cannot set my VGA to go higher than 16 color (640x 480).
1. Make sure that you have installed the VIA 4 in 1 driver.
2. Install/ re-install the VGA driver.
After wake-up from Suspend to RAM or Standby mode, the screen has
no display but I can hear the hard disk operating
1. Install VIA 4 in 1 driver.
2. Check the VGA card manufacturer for a driver update, or make
sure the VGA card supports the Suspend to Ram function
.
Audio Issue
How can I disable the on-board Audio?
Go to the SOYO Combo Feature in the BIOS setup, then set the “onboard
6CH H/W audio” to disable.
I cannot get the sound working on my system.
1. Check if the speaker wire is connected to the line out connector in
the M/B.
2. Check if the speaker power is powered on.
3. Install the audio driver supplied on our driver disc.
4. Check BIOS setup if “onboard 6CH H/W audio” is enabled.
5. If sound is already installed, check our website for an audio driver
update.
I cannot get the sound working on the 5.1 channel speaker.
1. Install the audio driver and application. Check driver installation
for more info.
2. Check if the settings in the 5.1 speaker control box are correct, like
if you have a SPDIF connector but the setup in the speaker box is
set to analog.