Filter
Top Products
SY-KT600 DRAGON Plus
Quick Start Guide
15
Hardware
Installation
ABR (Anti Burn Regulator)
SOYO's ABR (Anti Burn Regulator) is a specially designed hardware circuit that works hand in hand
with the CPU’s internal sensor in monitoring the temperature of the CPU and prevent it from
overheating.
Once the heat accumulated in the CPU is over the set limit. ABR will automatically shut down the
system power and warn you with a beeping sound. To de-activate the beeping sound, un-plug the
AC power cord. We recommend you to check the cause of the overheating and let the processor
cool down before powering on the system.
Note: ABR supports AMD Athlon XP and Morgan CPU. Thunderbird and Duron CPUs
are not supported
Some early versions of the 2400+ and 2600+ XP CPUs when used in this motherboard will
automatically activate the ABR function, thus making a beeping sound and shut down your system. If
this compatibility issue arises, you need to disable the ABR function via the ABR hardware jumper.
Setting Enabled Disabled
ABR Jumper
Step 2. Configure Memory
Your board comes with three DIMM sockets, providing support for up to 3GB of main
memory using unbuffered and ECC DIMM modules. On this motherboard, DRAM
speed can be set independent from the CPU FSB speed.
Memory Configuration Table
Number of Memory
Modules
DIMM 1 DIMM 2 DIMM 3
RAM Type
DDR RAM PC2100/PC2700/3200
(
non
-
register & ECC)
Memory Module Size (MB) 128 / 256 / 512 / 1024 MB
12
12