Filter
Top Products
SY-P4VSA Quick Start Guide
6
Hardware
Installation
2
2
Installation
To avoid damage to your Motherboard, please follow these simple rules while
handling this equipment:
Before handling the Motherboard, ground yourself by touching on to an unpainted
portion of the system's metal chassis.
Remove the Motherboard from its anti-static packaging. Hold the motherboard by the
edges and avoid touching its components.
Check the Motherboard for damage. If any chip appears to be loose, press carefully
to seat it firmly in its socket.
Follow the directions in this section which is designed to guide you through a quick and
correct method to install your new
SY-P4VSA
Motherboard. For detailed information, please
refer to the SY-P4VSA Motherboard User's Manual and Technical Reference online manual
on the CD-ROM that came with your Motherboard.
Gather and prepare all necessary components to complete the installation successfully:
Socket mPGA 478 processor with built-in CPU cooling fan (boxed type)
SDRAM module (s)
Computer case with adequate power supply unit
Monitor
PS/2 Keyboard
Pointing Device (PS/2 Mouse)
Speaker(s) (optional)
Disk Drives: HDD, CD-ROM, Floppy drive…
External Peripherals: Printer, Plotter, and Modem (optional)
Internal Peripherals: Modem and LAN cards (optional)
VGA Card (AGP, PCI)