Filter
Top Products
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising
from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or
indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the
product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply,
the limitations or exclusions contained in this statement may not apply to you.
ST4300USB3
ST4300USB3GB
ST4300USB3EU
4-Port Black SuperSpeed USB 3.0 Hub
Installation Guide
Packaging Contents
• 1 x USB 3.0 hub
• 1 x USB 3.0 cable
• 1 x Power Adapter
System Requirements
• USB enabled computer system with an
available USB port
• Available AC power outlet (optional)
• Microsoft
®
Windows
®
XP/Server 20E03/
Vista/Server 2008 R2/7 (32/64-bit)
Specications
Bus Interface
USB 3.0
Number of Ports
4
Chipset ID
VLI VL810
Connectors
4 x USB 3.0 type A female
1 x USB 3.0 type B female
1 x DC Power
LEDs
1 x Power
Maximum Data Trans-
fer Rate
USB 3.0: 5 Gbps
Enclosure Material
Plastic
Power Adapter
5VDC, 2000mA, type M plug
Operating Temperature
0°C ~ 55°C (32°F ~ 131°F)
Storage Temperature
-20°C ~ 85°C (-4°F ~ 185°F)
Humidity
5% ~ 95% RH
Dimensions
152.0mm x 59.6mm x 23.5mm
Weight
480 g
Compatible Operating
Systems
Windows XP/Server 2003/Vista/
Server 2008 R2/7 (32/64-bit)
Manual Revision:10/27/2010
For the most up-to-date information, please visit www.startech.com
Installation
1. Connect the included power adapter to the
USB hub. The power LED should light up
solid. Supplying external power is optional,
however to ensure each USB port is fully
powered, connecting external power is
recommended.
2. Connect the USB cable from the USB hub
(type B port) to the host computer system.
NOTE: If connected to a USB 2.0 host port,
the hub will only operate at USB 2.0 speeds.
3. The operating system should detect the
hub immediately and automatically install it.
4. Once installation is complete, USB
1.x/2.0/3.0 devices should be able to be
connected to the hub and recognized.
*actual product may vary from photos