Steren COM-820 Network Router User Manual


 
- MAC Address - The connected wireless station’s MAC address
- Current Status - The connected wireless station’s running
status, one of STA-AUTH / STA-ASSOC / AP-UP / WPA /
WPA-PSK /WPA2/WPA2-PSK/None
- Received Packets - packets received by the station
- Sent Packets - packets sent by the station
You cannot change any of the values on this page. To update
this page and to show the current connected wireless stations,
click on the Refresh button.
If the numbers of connected wireless stations go beyond one
page, click the Next button to go to the next page and click the
Previous button to return the previous page.
This page will be refreshed automatically every 5 seconds.
DHCP
There are three submenus under the DHCP menu (shown in
gure 31): DHCP Settings, DHCP Clients List and Address
Reservation. Click any of them, and you will be able to con gure
the corresponding function. The detailed explanations for each
submenu are provided below.
DHCP Settings
The router is set up by default as a DHCP (Dynamic Host
Con guration Protocol) server, which provides the TCP/IP
con guration for all the PCs that are connected to the router
on the LAN. The DHCP Server can be con gured on the page
(shown in gure 32):
Fig. 31
T
his pa
g
e will be refreshed automaticall
y
ever
y
5 seconds
.
ENGLISH
ENGLISH-38