Filter
Top Products
9-10 Ultra Enterprise 6000/5000/4000 Systems Manual—November 1996
9
If the system cannot communicate with a 10BASE-T network, the Ethernet link
test setting for the port may be incompatible with the setting at the network
hub. See Section 9.5.1, “Failure of Network Communications,” for further
details.
9.4.4.3 probe-scsi Command
The probe-scsi command locates and tests SCSI devices attached to the
system. probe-scsi is run from the OpenBoot prompt.
When it is not practical to halt the system, you can use SunVTS as an alternate
method of testing the SCSI interfaces.
9.4.4.4 Reference Documents for POST/OpenBoot
• OpenBoot 3.x Command Reference, part number 802-3242
• Writing FCode 3.x Programs, part number 802-3230
9.4.5 Solstice SyMON
The Solstice™ SyMON™ program monitors system functioning and features a
graphical user interface (GUI) to continuously display system status. Solstice
SyMON is intended to complement system management tools such as SunVTS.
Solstice SyMON is accessible through an SNMP interface from network tools
such as Solstice™ SunNet Manager™.
Refer to the Solstice SyMON User’s Guide manual, part number 802-5355, for
starting and operating instructions.