Filter
Top Products
Appendix E Serial Attached SCSI BIOS Configuration Utility E-17
E.3.6 Device Properties Screen
The Device Properties screen displays information about a specific device, as shown
in
FIGURE E-9. To access this screen, press Alt+D on the SAS Topology screen when
the cursor is on the Device Identifier field of a device.
Press Alt+N or Alt+P at any time while on this screen to cycle to the next or previous
device.
********************************************************************************
* LSI Logic MPT Setup Utility v6.02.00.00 (2005.07.08) *
* Device Properties -- SAS1064 *
* *
* *
* Device Identifier SEAGATE ST936701LSUN36G 0456 *
* Scan Order 2 *
* Device Information SAS *
* SAS Address 5000C500:001047C9 *
* Serial Number 39000SZC 3LC *
* *
* Verify *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* Esc=Exit F1=Help Alt+M=More Keys *
* Alt+N = Next Device Alt+P = Previous Device Enter = Select Item *
*******************************************************************************
FIGURE E-9 Device Properties Screen
TABLE E-6 Device Properties Screen Field Descriptions
Field Description
Device Identifier The ASCII device identifier string extracted from the device’s
inquiry data.
Scan Order The scan order for this device. This is the equivalent of a SCSI ID in
parallel SCSI.
Device Information Indicates whether the device is SAS or SATA.
(SATA is not supported on Sun Fire X4100 or Sun Fire X4200 servers
at this time.)