Filter
Top Products
Chapter 3 Maintaining the Sun Fire X4100 Server 3-21
7. Install the DVD-ROM drive into the chassis. See FIGURE 3-17:
a. Align the rear of the DVD-ROM drive with the opening in the chassis.
b. Push the DVD-ROM drive into the chassis until the spring latch on the chassis
closes over the front corner of the drive.
FIGURE 3-17 Installing the DVD-ROM Drive (Sun Fire X4200 server shown)
8. Connect the unused flex cable connector to the rear of the DVD-ROM drive. See
FIGURE 3-18.
FIGURE 3-18 Connecting the DVD-ROM Drive Flex Cable Connector (Sun Fire X4200
server shown)
Spring
latch