Sunix 8082-GT 8 Switch User Manual


 
771-ESWQIG0000-NCI
Introduction
DIN-Rail Installation Step
Please check if the following items are present and in good condition upon opening
your package. Contact your vendor if any item is damaged or missing.
Management Industrial Ethernet Switch
Accessories
SUNIX Din Rail AccessoryPackage 1
Wall MountableAccessory Package 1
Fiber Lid 2 ( For ESW-80XX-G Series Model )
×
×
×
Features
Fast redundant ethernetring with recovery time< 10ms (Elite Ring)
Support SNMPv1/v2c/v3 &RMON network management
Support Web-based, Telnet, Console, Utilityconfiguration
Supports IGMPv1/v2/v3 snooping,Quality of Service determinedby port
Supports port base/802.1QVLAN and Dynamic VLANRegister Protocol (GVRP)
Event notification byEmail, SNMP trap andRelay Output
Supports online portmirroring and IPsecurity
Multi Ring andDual Homing support
Port rate limitingand broadcast storm limiting
Redundant dual low-voltageDC inputs (12 ~48VDC)
Supports 802.3ad, LACPfor optimum bandwidth utilization
Port Trunking foroptimum bandwidth utilization
Long-haul transmission distanceup to 30km (Fiberport)
Support all LANswitches setting at thesame time by the SUNIX commander
Din-rail/Wall-mounting installation
Version 1.0
SUNIX Ethernet infrastructure products. SUNIX Ethernet Switches(ESW
Series) are designed focus on Ethernet deployment inautomation applications
and specially developed for industrial Ethernet applications withall concerns
for industrial environments taken into consideration.The advanced
management features, Elite-Ring (communication redundancytechnology),
easy configuration and robust mechanical from factors enable quick Ethernet
installation for factory, transportation , building and utility automation
applications. Redundant power inputs and relay output alarmprovides the
possibility to build an on-sitealarm system. SUNIX switches are ideal forany
application where performance demands arehighest, environments are harsh
and operations are nonstop.
Elite-Ring Technology
Redundancy is always a primary
consideration for developing secure
and reliable industrial networks.
SUNIX Managed Switches are
equipped with Elite-Ring feature
which provides industrial Networks
with high-speed communication
redundancy.
Elite-Ring employs a ring structure
of either copper or fiberoptic cable
or combination of both byusing two
ports of each switch ina ring network.
A network can recoverin less
than 10ms.
SWITCH
I
n
d
u
s
t
r
i
a
l
M
a
n
a
g
e
d
SUNIX CD
Quick Installation Guide (This Document )
User Manual ( In CD )
Industrial Management Ether net Switches
Wall-Mounting Installation Step
SUNIX Comander Management Utility Software
SUNIX Commander is a powerful Switch managed softwaredesigned by
SUNIX Group. It could provideusers set up all Switches in theethernet by
one time. Users could setup one group Switches IP Address, everykind of
IEEE 802 Protocol, upgra e at thesame time. SUNIX
managing software lowers users' burden and saves time.
d Commander a strong
Package List
8082-GT
8Ports10/100Base-TX+2Ports10/100/1000Base-TX
8082-GP
8Ports10/100Base-TX+2Ports1000Base-FX(SFPType)
Model Specification
8062-GM
6Ports10/100Base-TX+2Ports1000Base-SX MultiMode()
8062-GS
6Ports10/100Base-TX+2Ports1000Base-LX SingleMode()
8062-GT
6Ports10/100Base-TX+2Ports10/100/1000Base-TX
8062-TX
8Ports10/100Base-TX
8062-MM
6Ports10/100Base-TX+2Ports100Base-FX(MultiMode)
8062-SS
6Ports10/100Base-TX+2Ports100Base-FX(SingleMode)
Quick Installation Guide