Targus APP20US Network Card User Manual


 
Quick Start
universal
auto / dual
digital device adapter
Digital Device tip
(sold separately)
Accessory Powering
System cable
Notebook Power Adapter
(sold separately)
Notebook
Mobile phone
PDA
Output cable
(sold separately)
Tip to computer
(sold separately)
MP3
player
2953
Features and specifications are subject to change without notice. All trademarks and registered trademarks are the property of their respective owners. © 2007, Targus Group International, Inc. and Targus, Inc. APP20US / 410-0179-101A
DC In-Air connector
(sold separately)
OR
DC In-Auto Connector
DC
auto
DC
air
Press
AC wall
Digital Camera
CAUTION
Using an incorrect tip for your notebook
computer may damage your computer or
cause it to malfunction.
For tip compatibility, go to:
http://www.targus.com/
STOP
Do not return the product to your retailer.
Need help with tip selection?
Please visit:
www.targus.com/us/powerstore.asp
to match the right tip with your device.
Or call Targus at (877) 482-7487
AC Input Cable
(sold separately)
Product Registration
Targus recommends that you register your Targus accessory shortly after purchasing it. To register your Targus accessory, go to: http://www.targus.com/registration.asp
You will need to provide your full name, email address, phone number, and company information (if applicable).
Warranty
Targus warrants this product to be free from defects in materials and workmanship for two years. If your Targus accessory is found to be defective within that time, we will promptly repair or
replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions isTargus liable for loss of, or damage to a computer; nor loss
of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory
rights.
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
FCC Statement
Tested to Comply
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful
interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected;
• Consult the dealer or an experienced radio/TV technician for help;
Changes or modifications not authorized by the party responsible for compliance could void the user’s authority to operate this product.