Filter
Top Products
AT Commands
Page 157
AT%Ln Transmit Level (Data Mode)
This command allows you to alter the transmit level of your modem. The command is in the
form:
AT%Ln
where n is the level you wish to select.
For example:
To set the transmit level to -15dBm:
• Type: AT%L15 <E>
WARNING
Do not change the transmit level of your modem unless you have a specific reason for
doing so. Changing the transmit level of your modem may adversely affect its
performance.
Options
11-19 (13 default) -11dB-19dB transmit level
Range
11-19
☞
The %L command is not reset by the AT&F command. Fax Tx Levels are set by S register
S103 with lower values giving higher levels.