MIU202T Installation, Operation & Diagnostics Edition: April 4, 1998 Page 7
5. ANALOG LINE SPECIFICATIONS
The MIU202T contains analog circuitry for connection to the public conditioned or
unconditioned, Bell type 3002, 2 or 4-wire, full duplex voice grade leased lines or
metallic lines (eg; pilot wires). The MIU202T will also interface to Power Line
Carrier or Microwave radio voice channel networks.
The MIU202T has an RJ-11terminated connector. The following lists the
MIU202T analog interfaces
Analog Line Type:
Conditioned or unconditioned, Bell type 3002, 2 or 4-wire, full duplex voice grade or
metallic lines or better.
Analog Line Specifications:
Bandwidth 300 Hz to 3400 Hz (±3dB)
Impedance 600 / 900 ohms , balanced
Frequency Response 400 to 3000Hz (±2dB)
Receiver Input Level -16dBm max.
Output Level +7 dBm
Noise Signal Level -48 dBmO
