Toshiba 1000 Power Supply User Manual


 
TOSHIBA/HOUSTON INVERTER PLANT
DESIGN DATA D-UM0029 Page 1 of 4
SUBJECT:
1000 Series UPS Options – Frequency Conversion
RELATED DATA FILE NO.
COPY DRAWN BY: DATE:
TO: H. Huynh 10/2005
TO: CHECKED BY:
TO: MTA 10/2005
TO: APPROVED BY: DATE:
NO. REVISION DATE BY TO:
FOR AUTHORIZED SERVICE PERSONAL ONLY
Models: 1000 Series UPS
CAUTIONS
&
INSTALLATION INSTRUCTIONS
Cautions:
Any maintenance, additions, and/or changes that are to be done to this UPS should be
performed by a certified Toshiba trained repair technician authorized to service
Toshiba’s 1000 Series UPS.
The followings are a list of minimum safety requirements that should be adhered to,
and is not to be interpreted to be the only safety requirements to follow. Please follow
all Local, State, and Federal Safety Requirements.
1) Verify that the UPS is off and that the power cord or main power is disconnected from
the power source. (Observe Lock-out/Tag-out procedures if applicable)
2) Remove watches, rings, and/or other metal objects.
3) Use insulated tools to prevent inadvertent shorts.
4) Wear safety glasses, rubber gloves and boots.
5) Do not lay tools or metal parts on top of the batteries.
6) All connections must be made in accordance with National and Local Electric Codes.
In no event will Toshiba Corporation be responsible or liable for either indirect or
consequential damage or injury that may result from the modification of this unit.
Installation Instructions: