Toshiba 210C Copier User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
USING THE EDITING FUNCTIONS5-12
Select other copy modes as required.
6
Press the START key.
- When placing an original on the glass, perform steps 5 to 6 on
page 2-3 continuously.
- If the optional finisher (MJ-1020) equipped with the saddle
stitcher is installed, copies can be automatically stapled
along their centre line. To have copies stapled, press the
STAPLE ON key.
- Maximum number of sheets that can be stapled
Page 7-7
If the binding margin is set as less than 12mm and the STAPLE
ON key is pressed, the paper may not exit normally.
7. MAGAZINE SORT (FROM THE EDITING MENU) (Cont.)
5
Adjust the binding margin and press the SET key.
- The default width of the margin is 12 mm.
- To adjust the width, press the
12mm or 30mm key to
select the desired number, then press the SET key.