Toshiba 230L Printer User Manual


 
Printing Guide — Printing from UNIX 311
If this option is not specified, the printer’s default value will be used.
Example: The command to staple in the upper left corner of a long edge feed portrait page is
“lp –o staple=1 filename”.
The value for the stapling position depends on the paper size, the paper feed direction, and the
print direction. This function is not available for all paper sizes and the users should refer to the
copier manual for a list of compatible paper sizes. In particular, A5, A6 and statement paper
sizes will not work with this function.
— Output Bin
The output bin can be specified using the following options.
staple=2 Put two staples on the left side of a portrait page or the top side
of a landscape page printed on long-edge-feed paper. This com-
mand has no affect when the paper is fed from the short-edge
side.
staple=3 Staple in the bottom left corner of a portrait page and the upper
left corner of a landscape page.
staple=4 Staple in the top right corner of a portrait page and the bottom
right corner of a landscape page.
staple=5 Put 2 staples on the right side of a portrait page or the bottom
side of a landscape page printed on long-edge-feed paper. This
command has no affect when the paper is fed from the
short-edge side.
staple=6 Staple in the bottom right corner of a portrait page and the lower
left corner of a landscape page.
staple=7 Put 2 staples on the top side of a portrait page or the right side of
a landscape page printed on short-edge-feed large format (A3/
Ledger) paper. This command has no affect when the paper is
fed from the long-edge side or small paper size.
staple=8 Put 2 staples on the bottom side of a portrait page or the left side
of a landscape page printed on short-edge-feed large format
(A3/Ledger) paper. This command has no affect when the paper
is fed from the long-edge side or small paper size.
staple=9 Put 2 staples in the middle of a landscape page and fold the
paper in half vertically along the staple line (saddle stitching).
This command works in conjunction with booklet printing. This
command has no affect when the paper is fed from the
long-edge side.
Option Value Alternate
Value
Description
inner Select the inner output tray.
bin1 Select the upper output tray of the finisher.
bin2 Select the lower output tray of the finisher.
jsp1 Select the upper output tray of the Job Separator.
jsp2 Select the lower output tray of the Job Separator.
Option Value Alternate
Value
Description