Filter
Top Products
TOSHIBA 6F3A4508
- 10 -
[5] Wi Tool functions
Wi Tool has the following functions. The details of the function are described in the next chapter.
(1) Word
Reads and writes data (control value motor speed, control gain, etc.) inside the drive equipment.
(2) Char string
Reads and writes character string data inside the drive equipment.
(3) Bit
Reads and writes data (sequence data etc.) inside the drive equipment.
Displays and write in bit units.
(4) Set point control
Saves set points in the drive equipment to a file. Or loads the data saved in file to the drive
equipment and compares the set point in the drive equipment with the data saved in file. Also,
transfers the set points in the drive equipment RAM to EEPROM.
(5) Traceback
Reads, displays as graph, prints, and saves to file the control data (motor speed, motor current,
etc.) when there is a drive equipment fault.
(6) Snapshot
Controls the data record function of the drive equipment which specifies a trigger condition and
saves the specified signal.
(7) Trend display
Collects drive equipment data from PC and displays them on the PC.
(8) Step response
Provides step reference for test to drive equipment from PC, starts step response, and
displays/prints this data.
Also, saves data during step response to file and prints/displays data in file.
(9) Control password
Adds/deletes User Name, Access Level, and Password recorded in the drive equipment.
(10) Property
Displays and updates information in the drive equipment. The target data are, Panel Name,
Toshiba Order No., Toshiba Item No., and drive internal clock data.
(11) Preparation
Displays the drive equipment operating conditions. Displays the missing condition if there is any.
(12) End
Ends Wi Tool.