Filter
Top Products
TOSHIBA 6F3A4508
- 3 -
[2] Wi Tool connection
The following three types of network connections are available for Wi Tool:
1) 1:1 connection
PC and drive are connected 1 to 1.
Therefore, only one PC and drive equipment are connected to the network.
Figure 2 1:1 connection
2) 1:N connection
Multiple drive equipments are connected to a single PC.
Normally, the network is connected through a device called the HUB.
In this case, an IP address is required for the PC and each drive unit.
Figure 2 1:N connection
250Wi
Ethernet
Ethernet
Ethernet
Hub
T-
250Wi
T-
250Wi
T-
250Wi