Filter
Top Products
4 Replacement Procedures 4.6 Switch membrane
Installing the switch membrane
The following describes the procedure for installing the switch membrane (See Figure 4-11).
1. Connect the switch membrane to the connector CN9650 on the system board.
2. Slide the switch membrane to install and secure it with the following screw.
• M2.5×2.8B FLAT BIND screw x1
3. Install the LCD CON holder and secure it with the following screw.
• M2.5×6B FLAT BIND screw x1
NOTE: When installing the LCD CON holder, be careful not to catch harnesses, cables
and the core of the LCD harness.
QOSMIO F10 Maintenance Manual (960-498) 4-23