Filter
Top Products
4.8 Display assembly 4 Replacement Procedures
4.8 Display assembly
Removing the display assembly
The following describes the procedure for removing the display assembly (See Figure 4-14 to
4-18).
1. Close the display and turn the computer upside down.
2. Remove the following screws from the bottom of the computer.
• M2.5×10B FLAT BIND screw x12 (“10” in the figure)
• M2.5×10B FLAT BIND screw x2 (“10+L” in the figure)
(Locktight)
• M2.5×4B FLAT BIND screw x1 (“4” in the figure)
10+L
10
10
10
10 10+L
10
10
10
10
10
4
10
10
10
Figure 4-14 Removing the screws (back)
4-26 QOSMIO F10 Maintenance Manual (960-498)