Filter
Top Products
4 Replacement Procedures 4.14 TV tuner module/Guide
4.14 TV tuner module/Guide
4.14.1 TV tuner module
Removing the TV tuner module
The following describes the procedure for removing the TV tuner module (See Figure 4-26).
1. Disconnect the TV tuner harness from the connector on the TV tuner module.
2. Disconnect the TV tuner coaxial cable from the connector on the TV tuner module.
3. Remove the following screws securing the TV tuner module.
• M2×4Z BIND screw x2
4. Open the left and right latches holding the TV tuner module and remove it.
M2x4Z BIND
TV tuner harness
TV tuner module
Latches
TV tuner coaxial cable
Figure 4-26 Removing the TV tuner module
QOSMIO F10 Maintenance Manual (960-498) 4-41