Filter
Top Products
4.19 Battery latch 4 Replacement Procedures
Installing the battery latch
The following describes the procedure for installing the battery latch (See Figure 4-34 and 4-
35).
1. Install the battery lock button.
2. Set the spring on the battery latch and install the battery latch on the battery latch
assembly. Make sure the spring is not set over the stopper.
3. Install the battery assembly to the base assembly from the HDD side and secure it
with the following screws.
• M2×4Z FLAT BIND screw x2
4. Slide the battery lock to the battery side.
5. Make sure the battery latch works smoothly by sliding it from the bottom side.
4-52 QOSMIO F10 Maintenance Manual (960-498)