Filter
Top Products
2.9 Display Troubleshooting 2 Troubleshooting Procedures
Procedure 3 Connector Check and Cable Check
The LCD module is connected to the system board by an LCD/FL cable. The FL inverter
board is also connected to the system board by an LCD/FL cable. And the FL is connected to
the FL inverter board by the HV cable. The connectors may be disconnected from the system
board or the FL inverter, or they may be damaged. Disassemble the computer following the
steps described in Chapter 4, Replacement Procedures.
If the connection is loose, reconnect firmly and restart the computer. If there is still an error,
go to Procedure 4.
2-48 QOSMIO F10 Maintenance Manual (960-498)