Toshiba A100 Webcam User Manual


 
3.2 Executing the Diagnostic Test 3 Tests and Diagnostics
PORTEGE A100 Maintenance Manual (960-460) 3-3
3.2 Executing the Diagnostic Test
To start the DIAGNOSTIC PROGRAM, follow these steps:
1. Insert the test program disk (No.1) in the floppy disk drive.
2. Release the lock of the power switch and turn on the computer by pressing the F12. Select
the FDD in the display for selecting booting unit. Then press ENTER and the following
menu appears:
TOSHIBA personal Computer XXXX DIAGNOSTICS
version XXX (c) Copyright TOSHIBA Corp. 20XX
DIAGNOSTICS MENU :
1 - DIAGNOSTIC TEST
2 –
3 -
4 - HEAD CLEANING
5 - LOG UTILITIES
6 - RUNNING TEST
7 - FDD UTILITIES
8 - SYSTEM CONFIGURATION
9 - EXIT TO MS-DOS
0 – SETUP
Note: To exit the DIAGNOSTIC TEST MENU, press the Esc. If a test program is in
progress, press Ctrl+Break to exit the test program. If a test program is in
progress, press Ctrl+C to stop the test program.