Filter
Top Products
3.17 Sound/LAN/Modem Test 3 Tests and Diagnostics
PORTEGE A100 Maintenance Manual (960-460) 3-45
3.17 Sound/LAN/Modem Test
To execute the Sound/LAN/Modem Test, use the Test Diagnostics disk (No.3). Finish the tests of
the Diagnostics disk (No.1) by selecting 99 - EXIT TO DIAGNOSTICS MENU in the
DIAGNOSTIC TEST MENU. Then in the DIAGNOSTICS MENU, select 9 - EXIT TO MS-
DOS.
Insert the Test program disk (No.2) in the floppy disk drive and turn on the power. The following
message will appear:
####################################################################
####### XXXX DIAGNOSTICS PROGRAM (SOUND/LAN/MODEM TEST) #######
####################################################################
* *
* 1 ............ (Microphoned recording&play) *
* 2 ............ (DOREMI) *
* 3 ............ (LAN) *
* 4 ............ (MODEM) *
********************************************************************
.... Press test number[1-4] ?
Press the number you want to test and press Enter.
Note: To execute Subtest 01, the external microphone is required. The system is capable
of producing high volume sound, so when you use the headphones be careful to set
the volume low and adjust it as necessary. Using the headphones at full volume
could damage your ears.
Subtest 01 Microphoned recording & play
Executed by the load format of Playwave/recwave.
The sound is recorded automatically from microphone when the following message
appears.
Recording ……(Press “S” to stop)
The sound is played automatically when the following message appears.
Playing ……(Press “S” to stop)