Filter
Top Products
3.18 IEEE 1394 Test 3 Tests and Diagnostics
PORTEGE A100 Maintenance Manual (960-460) 3-47
3.18 IEEE 1394 Test
To execute the IEEE 1394Test, use the Test Diagnostics disk (No.4). Finish the tests of the
Diagnostics disk (No.1) by selecting 99 - EXIT TO DIAGNOSTICS MENU in the
DIAGNOSTIC TEST MENU. Then in the DIAGNOSTICS MENU, select 9 - EXIT TO MS-
DOS.
Insert the Test program disk (No.3) in the floppy disk drive and turn on the power. The following
message will appear:
********************************************************************
* --------------------------------------------------------- *
* EEE1394 test menu (For repair) *
* --------------------------------------------------------- *
* *
* ============= Select test NO. and [Enter] ============= *
* *
* 1 ....Transmit & Receive test *
* 2 ....Responder tool *
* 3 ....1394 GUID Display *
* *
********************************************************************
.... Press test number [1-3] ?
Press the number you want to test and press Enter.
Subtest 01 Transmit & Receive test
Specifies the data size and transfer speed between the responder connected with a
responding cable, and sends and receives data. A dedicated cable for
I-link is necessary.
Subtest 02 Responder tool
Setting Menu only for receiving in a responding test.
Subtest 03 1394 GUID Display
GUID can be displayed.