Filter
Top Products
3.26 SETUP 3 Test and Diagnostics
PORTEGE A100 Maintenance Manual (960-460) 3-67
3.26.2 Accessing the SETUP Program
Selecting 0-SETUP from the DIAGNOSTICS MENU and pressing Enter displays the followings:
Boot Priority =HDD
→
FDD
→
CD-ROM
→
LAN
HDD Priority = Built-in HDD
→
PC Card
Network Boot Protocol = PXE
Total = XXXXX KB
MEMORY
Not Registered
Power On Display = Auto-Selected
LCD Display Stretch = Enabled
TV Type = NTSC(Japan)
Power-up mode = Boot
CPU Cache = Enabled
Level 2 Cache = Enabled
Dynamic CPU Frequency Mode
= Dynamically Switchable
Auto Power On = Disabled
Sound Logo = Enabled
Power Button Lamp = Mode 1
SYSTEM SETUP (1/2) ACPI BIOS version = X.XX
BOOT PRIORITY
PASSWORD
DISPLAY
Battery Save Mode = Full Power
BATTERY
Others
↑↓→←
: Select items Space, BkSp: Change values PgDn, PgUp: Change pages
Esc: Exit without saving Home : Set default values End: Save changes and Exit
Date(MM-DD-YY) = XX-XX-XXXX
Time(HH:MM:SS) = XX:XX:XX
SYSTEM DATE/TIME
Controller Mode = Auto-SelectedDevice Config. = Setup by OS
CONFIGURATION
PCI BUS = IRQ10,IRQ11
Built-in HDD
= Primary IDE(1F0H/IRQ14)
CD-ROM = Secondary IDE(170H/IRQ)
SYSTEM SETUP (2/2) ACPI BIOS version = X.XX
PC CARD
DRIVES I/O
PCI BUS
↑↓→←
: Select items Space, BkSp: Change values PgDn, PgUp: Change pages
Esc: Exit without saving Home: Set default values End: Save changes and Exit
Built-in LAN = Enabled
PCI LAN
USB KB/Mouse Legacy Emulation
= Enabled
USB-FDD Legacy Emulation =
Enabled
LEGACY EMULATION
Internal Pointing Device = Enabled
Hard Disk Mode = Enhanced IDE(Normal)
PERIPHERAL