Filter
Top Products
3 Test and Diagnostics 3.26 SETUP
3-76 PORTEGE A100 Maintenance Manual (960-460)
(e) Auto Power On
This option displays setting for Wake-up on LAN. When Windows XP is
operating, this function is disabled.
Enabled Indicates auto power on and Wake-up on LAN is set.
Disabled Indicates auto power on and Wake-up on LAN is not set.
When “Enabled” is set, the following subwindow appears.
Auto power on and Wake-up on LAN is set in the options subwindow. To set
alarm time, use Space and BackSpace. To switch between time and minute,
month and date, use ↑ and ↓.
Alarm Time sets a time and date for automatic power on. Second cannot be set.
When this option is set to “Disabled”, the time for automatic power on is not set.
Alarm Date Option sets a month and date in order for automatic power on. When
Alarm Time is set to “Disabled”, month and date for automatic power on is not set.
Ring Indicator turns on the power automatically when receiving a call from the line.
This item is displayed only in resume mode. A PC card type modem is required for
this option. When your computer has no modem, this option is not displayed.
Wake-up on LAN automatically turn on the computer when accessed by the
administrator of LAN. When Built-in LAN is “Enabled”, this option can be set to
“Enabled”. AC adapter is required for this option.
Note: 1 .Do not remove the AC adapter and battery pack at the same time when you
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. This option is enabled only once, the setting is reset after booting up
(f) Sound Logo
This option specifies whether to sound at booting.
Enabled Sounds.
Disabled Does Not sound.
Alarm Time = 00:00:00
Alarm Date Option = Disabled
Ring Indicator = Disabled
Wake-up on LAN = Disabled
OPTIONS