Filter
Top Products
4 Replacement Procedures 4.10 HDD
4-24 PORTEGE A100 Maintenance Manual (960-460)
4. Detach the HDD bracket from the HDD.
M3
×
4S FLAT BIND
HDD bracket
HDD
M3×4S FLAT BIND
Figure 4-15 Removing the HDD
Installing a HDD
The following describes the procedure for installing a HDD. (See Figure 4-14, 4-15.)
1. Fix the HDD bracket to the HDD with the following screws.
• M3×4S FLAT BIND screw x4
2. Insert the HDD assembly into the HDD slot. Insert the tab into the gap between the
chassis of the computer and the HDD assembly.
3. Install the HDD cover from the bottom of the computer and secure it with the
following screw.
• M2.5×12B FLAT BIND screw x1