Filter
Top Products
4 Replacement Procedures 4.19 2nd Battery board/Heat sink/CPU
4-40 PORTEGE A100 Maintenance Manual (960-460)
Installing a CPU
To remove a CPU perform the following procedure. (See Figure 4-30.)
1. Make sure the mark of cam is in the position of “Releasing”.
2. Set the CPU in place on the CPU socket.
CPU socket
Triangle mark socket
CPU
Figure 4-30 Installing a CPU
Caution: When setting the CPU on the socket, make sure that the triangle mark on
the CPU come to the right position. (Refer to the above figure.)
3. Turn the cam clockwise 90 degrees with a minus screwdriver to fix the CPU.