Filter
Top Products
4 Replacement Procedures 4.23 LCD cable/Wireless LAN antenna / Bluetooth antenna
4-48 PORTEGE A100 Maintenance Manual (960-460)
4.23 LCD cable/Wireless LAN antenna / Bluetooth antenna
4.23.1 LCD cable
Removing the LCD cable
To remove the LCD cable, perform the following procedure. (See Figure 4-38.)
1. Remove the right side hinge cover (viewing from the front).
2. Peel off the acetate tape fixing the LCD cable and two acetate tapes fixing the
insulator.
3. Take the LCD cable out of the hinge hole.
LCD cable
Hinge cover
Acetate tapes
Acetate tape
Figure 4-38 Removing the LCD cable
Installing a LCD cable
To install a LCD cable, perform the following procedure. (See Figure 4-38.)
1. Pass the LCD cable through the hinge hole, put the cable (to the connector on the
system board) in the slot guiding the cable at the back.