Toshiba A100 Webcam User Manual


 
4 Replacement Procedures 4.23 LCD cable/Wireless LAN antenna / Bluetooth antenna
4-50 PORTEGE A100 Maintenance Manual (960-460)
3. Peel off the insulator and remove the wireless LAN antenna cable from the hinge hole.
Antenna cable
Insulator
Figure 4-40 Removing the wireless LAN antenna cable
Installing a wireless LAN antenna
To install a wireless LAN antenna cable LCD cable, perform the following procedure. (See
Figure 4-39, 4-40.)
1. Pass the wireless LAN antenna cable through the hinge hole, lay down the cable with
the speaker cable in place and stick them by the insulator.
2. Set the hinge cover. Do not make the wireless LAN antenna pinched and do not
mistake the direction.
3. Stick the wireless LAN antenna on the LCD cover in place and fix the antenna cable
with the acetate tape at five points. (fix together with the Bluetooth antenna cable at
three points)