Filter
Top Products
4 Replacement Procedures 4.23 LCD cable/Wireless LAN antenna / Bluetooth antenna
4-52 PORTEGE A100 Maintenance Manual (960-460)
Installing a Bluetooth antenna
To install a Bluetooth antenna, perform the following procedure. (See Figure 4-41.)
1. Pass the Bluetooth antenna cable with the LCD cable through the hinge hole and lay
down them in place. Pass the cable near the MDC module under the insulator.
2. Set the hinge cover. Do not make the wireless LAN antenna pinched and do not
mistake the direction.
3. Stick the Bluetooth antenna on the LCD cover in place and fix it with acetate tape at
four points (fix together with the wireless LAN antenna cable at three points).