Filter
Top Products
4.25 Fluorescent lamp 4 Replacement Procedures
PORTEGE A100 Maintenance Manual (960-460) 4-69
4.25.2 Replacing the 12.1 inch LG Phillips fluorescent lamp
The following describes the procedure for replacing the fluorescent lamp. (See Figure 4-56 to
4-63.)
1. Disassembly of outside tape/ Cover shield
<Procedure>
1) Disassembly of Tape adhesive used for B/L Wire fixing
Caution: Pressure or stress should not be given on B/L Wire.
2) Disassembly of Cover shield(S)
Caution: 1. Pressure or stress should not be given on Gate TCP.
2. Usage of gloves with anti-electric discharge coating is recommended
to eliminate possible damage on circuits occurred by ESC.
3) Disassembly of Cover shield(S)
Caution: Pressure or stress should not be given on Source PCB.
4) Disassembly of Tapes used for Top case fixing
Caution: Pressure or stress should not be given on Top case during this process.
Figure 4-56 Replacing LG Phillip fluorescent lamp (1)