Filter
Top Products
2.3 Power Supply Troubleshooting 2 Troubleshooting Procedures
PORTEGE A100 Maintenance Manual (960-460) 2-7
Procedure 1 Power Supply Icon Check
The following two icons indicate the power supply status:
q Battery icon
q DC IN icon
The power supply controller uses the power supply status with the Battery icon and the DC IN
icon as listed in the tables below.
Table 2-1 Battery icon
Table 2-2 DC IN icon
*3 When the power supply controller detects a malfunction, the DC IN icon blinks
orange. It shows an error code.
Battery icon Power supply status
Lights orange Battery is charged and the external DC is input. It has no relation with
ON/OFF of the system power.
Lights green Battery is fully charged and the external DC is input. It has no relation
with ON/OFF of the system power.
Blinks orange
(even intervals)
The battery level is low while the system power is ON.
Flashes orange The battery level is low and the power switch is pressed on in the
battery driving.
Doesn’t light Any condition other than those above.
DC IN icon Power supply status
Lights green DC power is being supplied from the AC adapter.
Blinks orange Power supply malfunction
* 3
Doesn’t light Any condition other than those above.