Toshiba A200 Personal Computer User Manual


 
3.20 ONLY ONE TEST 3 Tests and Diagnostics
PORTEGE A200 Maintenance Manual (960-499) 3-45
Slide the switch to OFF position. Then, following message appears in the display.
KILL SWITCH ON !!
Slide the switch to ON position. Then, following message appears in the display.
KILL SWITCH OFF !!
After Sliding the switch to OFF position, return to the ONLY ONE TEST menu
automatically.
Subtest 05 USB
Note: When executing this subtest, USB test module and USB cable must be connected.
This subtest checks if USB port works properly.
The following menu appears in the display.
################################################################
######## ONLY ONE TEST Menu (XXXXXXXXX) #######
################################################################
* *
* 0 ............ Port 0 *
* 1 ............ Port 1 *
* 2 ............ Port 2 *
* *
* 9 ............ EXIT *
* *
****************************************************************
*
.... Press test number[0-2, 9] ?
Connect the USB test module and USB cable to the computer.
Input the port test number and press Enter.
OK message appears in the display if the test ends without fail.
NG message appears in the display if an error is found during the test. Confirm the
connection of cable, and then execute the test again.
Press 9 and Enter to return to ONLY ONE TESST menu.