Open as PDF
3.30 SETUP 3 Tests and Diagnostics
PORTEGE A200 Maintenance Manual (960-499) 3-95
(e) Auto Power On
This option displays setting for Auto Power On.
Disabled Indicates auto power on is not set.
Enabled Indicates auto power on is set.
When “Enabled” is selected, the following sub-window appears.
Set the parameters for the Auto Power On (automatic power on) function in the
“OPTIONS” window. To set the time, use Space or BackSpace. Press ? to
move the cursor to the right and ? to move the cursor to the left when you set the
date and time.
For the Alarm Time, set the time to turn on the power automatically. The “second”
cannot be set. When it is set to “Disabled”, the time to turn on automatically is not
For the Alarm Date Option, set the date to turn on the power automatically.
When it is set to “Disabled”, the time to turn on automatically is not set.
The Ring Indicator is displayed only when the computer is in Resume mode and
this function cannot be used for a PC card-type modem. When any modem is not
installed, it is not displayed.
Note: 1. Do not remove the AC adaptor and battery pack at the same time when you
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power On
function and Resume is on, the computer will start with the instant security
function enabled. The password = message is not displayed; however, you
must enter the password to use the computer.
3. This option is enabled only once, the setting is reset, after booting up.
(f) Start Up Logo
This option enables or disables an animation logo function.
Animation Enables the animation logo function. (Default)
Picture Displays picture logo.
Alarm Time = 00:00:00
Alarm Date Option = Disabled
Ring Indicator = Disabled