Filter
Top Products
4 Replacement Procedures 4.11 Wireless LAN module
4-26 PORTEGE A200 Maintenance Manual (960-499)
4.11 Wireless LAN module
Removing the wireless LAN module
To remove the wireless LAN module, perform the following procedure. (See Figure 4-17.)
1. Peel off the glass tape on the wireless LAN antenna cables.
2. Remove the white and black antenna cables from the wireless LAN module using a
dedicated jig.
3. Open the latches fixing the wireless LAN module and remove the wireless LAN
module.
Figure 4-17 Removing the wireless LAN module
Installing a wireless LAN module
To install a wireless LAN module, perform the following procedure. (See Figure 4-17.)
1. Insert the wireless LAN module into the connector of the computer slantwise.
2. Push down the wireless LAN module until it is latched firmly.
Wireless LAN module
Latch
Antenna cable (white)
Glass tape
Antenna cable (black)