Open as PDF
4.23 LCD cable/LED cable 4 Replacement Procedures
PORTEGE A200 Maintenance Manual (960-499) 4-51
4.23 LCD cable/LED cable
4.23.1 LCD cable
Removing the LCD cable
To remove the LCD cable, perform the following procedure. (See Figure 4-41 to 4-43.)
1. Peel off the acetate tape fixing the LCD cable.
2. Remove the following screw and left side hinge cap (viewing from the front).
? M2.5?6S S-THIN HEAD screw ?1
3. Remove the following screw and LCD cable GND wire.
? M2?3SC S-THIN HEAD screw ?1
Figure 4-41 Removing the hinge cap
LCD cable GND wire