Filter
Top Products
4.25 Hinge assembly 4 Replacement Procedures
PORTEGE A200 Maintenance Manual (960-499) 4-59
3. Take both the hinge assemblies out from the holes of the base.
Figure 4-49 Removing the hinge assembly (base side)
Installing a hinge assembly
To install a hinge assembly, perform the following procedure. (See Figure 4-48 and 4-49.)
1. Fix the hinge assemblies to the LCD cover with the following screws.
? M2.5?6 Tapping screw ?2 (left?1, right?1)
? M2.5?4B FLAT HEAD ?2 (left?1, right?1)
2. Fix the hinge assemblies to the base with the following screws.
? M2.5?4B FLAT HEAD ?4
Caution: When fixing the hinge assembly, use new screws and apply Locktight to them.
M2.5
?
4B FLAT HEAD
Hinge assembly
Hinge assembly
M2.5
?
4B FLAT HEAD