Filter
Top Products
4-6 User’s Manual
A300
7. In case of finger injury or authentication failure, it is recommended that
another fingerprint also be enrolled. The following message will be
displayed: [We recommended enrolling at least two
fingerprint images.] Click OK and repeat steps 3, 4, 5 and 6 with
another finger.
How to delete the fingerprint data
Saved fingerprint data is stored in the Non-volatile memory inside the
fingerprint sensor. If you hand over the PC to others, or dispose of it, the
following operations are recommended.
1. Click Start, point to All Programs, point to TrueSuite Access
Manager and click it.
2. The TrueSuite Access Manager Fingerprint Software screen is
displayed.
3. Enter your Windows Password and click Next to enter the Control
Center. Or swipe your enrolled finger to enter the Control Center.
4. The user’s fingers screen is displayed.
■ To delete all registered fingerprints:
1. Click Delete All Fingerprint
2. Follow the on-screen instructions to delete the registered
fingerprints
■ To delete individual fingerprints:
1. Click the fingerprint mark above the registered finger
2. Are you sure you want to delete this
fingerprint? will be displayed on screen, click Yes button.
3. When Delete All Fingerprints is selected, the user selection screen
will be displayed, so select which user’s fingerprint data to delete.
■ Selecting Delete current user’s fingerprints will delete the
fingerprint data for the currently logged in user.
■ Selecting Delete all users’ fingerprints will delete the fingerprint
data for all users, however this item can only be selected if the
currently logged in user has administrator privileges.
A message will be displayed asking for confirmation to delete the
fingerprint.