Filter
Top Products
215
If Something Goes Wrong
Resolving a hardware conflict
5.375 x 8.375 ver 3.1
Display problems
Here are some typical display problems and their solutions:
The display is blank.
Display Auto Off may have gone into effect. Press any key to
activate the screen.
You may have activated the instant password feature by
pressing
Fn and F1 simultaneously. If you have registered a
password, press the
Enter key, type the password and press
Enter. If no password is registered, press Enter. The screen
reactivates and allows you to continue working.
The following display options may be available on your
system:
❖ Built-in display panel only
❖ Built-in display panel and external monitor
simultaneously
❖ External monitor only
❖ External video device only
To open the display options window, press
Fn and F5
simultaneously. To choose the desired option, hold down
Fn
and press
F5 repeatedly until your choice is selected.
To decrease or increase screen brightness you can use the hot
keys
Fn + F6 or Fn + F7.
If you are using an external monitor:
❖ Check that the monitor is turned on.
❖ Check that the monitor’s power cable is firmly plugged
into a working power outlet.
❖ Check that the cable connecting the external monitor to
the computer is firmly attached.