Filter
Top Products
6-40
EM18-33010A
6. DIAG. TEST OPERATION
(Revision Date: Dec. 10 ‘99)
6.3 PARAMETER SETTING MODE
6.3.18 Reset Selection when the INPUT • PRIME Signal is ON.
Reset ON/OFF when the INPUT • PRIME signal ON is selected.
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enable.
2. A changed “Reset ON/OFF when the INPUT • PRIME signal is ON” is stored in memory by
pressing the [PAUSE] key.
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [FEED] key.
Press the [PAUSE] key 20 times.
Select the "Reset ON/OFF
when the INPUT • PRIME
signal is ON" with the [FEED] key
or [RESTART] key.
Press the [PAUSE] key.
• ON: The printer will restore to the initial status.
• OFF: The printer will not restore to the initial status.
<1 DIAGN IC. V>
1.OA
OST
<2 PARAM R SET>
ETE
IN UT PR P
ON
IME