Filter
Top Products
1 PREPARATION
26 Description of Each Component
- When the originals need to be placed on the Automatic Document Feeder (optional)
(When a paper jam in the Automatic Document Feeder is released)
- When the Automatic Document Feeder (optional) on which the originals are placed is
raised.
19.[COPY] button/lamps
Use this button to select the size of paper to be used. The lamp of the paper size currently
selected blinks when this size of paper is not placed in the drawer or on the bypass tray.
See the following page for details:
P.54 “Manual paper selection”
20.[ORIGINAL] button/lamps
Use this button to specify the size of an original.
P.58 “Specifying both the sizes of the original and the copy paper”
21.APS/AMS selecting button/lamps
Automatic paper selection (APS): The equipment detects the size of original and automati-
cally selects the same size of copy paper.
P.53 “Paper Selection”
Automatic magnification selection (AMS): Set the size of copy paper to be used in advance.
The equipment then detects the size of original and automatically selects the most suitable
reproduction ratio to the copy paper.
P.56 “Automatic magnification selection (AMS)”
APS and AMS are available only when originals are placed on the Automatic Document
Feeder (optional, MR-2020).