Toshiba DP-1810 Copier User Manual


 
4 SETTINGS AND MANAGEMENT OF EQUIPMENT
70 Changing of the Enabled Energy Saving Mode
Changing of the Enabled Energy Saving Mode
The settings of the enabled energy saving mode and auto sleep time (time until entering the
mode) can be changed.
1
Press and hold the button for more than two seconds.
The present mode name (Sleep mode: SLP or Super sleep mode: SPS) is displayed in
the LED display for approx. 2 seconds, and then the current auto sleep time is displayed.
e.g.) Auto sleep time: 15 minutes in the super sleep mode
2
Press the button to switch the enabled mode.
The mode is switched each time you press the button, and the selected mode name is
displayed in the LED display for approx. 2 seconds.
3
Press the (zooming out) or (zooming in) button to change
the auto sleep time.
The auto sleep time (1 to 240 minutes / 24 steps) is switched each time you press the
button, and the specified time is displayed in the LED display.
4
Press the [START] button.
The LED display returns to the normal one.