Filter
Top Products
4 Replacement Procedures 4.14 Speakers
4.14 Speakers
Removing the Speakers
Remove the Speakers according to the following procedures and Figure 4-25.
1. Remove five M2x3 black flat head screws and two M2x2.5 black flat head screws
from shield.
2. Remove the shield.
3. Disconnect the speaker cable from CN9801 on the audio board.
4. Remove two M2x3 black flat head step screw securing the left speaker.
5. Remove two M2x3 black flat head step screws securing the right speaker.
6. Remove the left and right speakers.
M2x3 black flat
head step screw
M2x3 black flat
head screw
M2x2 5 black
flat head screw
.
M2x3 black flat
head screw
M2x3 black flat
head step screw
CN9801
Right speaker
Left cable
Shield
Figure 4-25 Removing the speakers
4-40 Satellite/E200/E205 Maintenance Manual